Missing application strings are preventing normal program interface.
The disk that this font is on may be damaged. Transfer the font to another disk before downloading it.
Fonts can only be downloaded from a limited number of separate disks. Download the current list and then return to this dialog to download the rest.
The space on the printer’s disk allocated for font storage is full.
There is no more memory in the LaserWriter available for font storage. Restarting the printer will remove all downloaded fonts from the printer’s memory. Any attempt to print will probably cause a printer restart.
A PostScript error has occurred in the LaserWriter. Restart the printer and try again.
The LaserWriter’s password must be set to 0 in order for this application to operate properly. Reset the password to 0 and try again.
The printer’s disk(s) could not be initialized. Make sure all disks are ON and properly connected to the printer. Restart the printer and try initializing again.
No printer is selected. Use the Chooser Desk Accessory to select an AppleTalk LaserWriter.
The selected printer has a hard disk attached to it, but it is not initialized. If you would like to initialize it, choose the Initialize Disk... item in the File menu.
The selected printer has a spooler attached to it. This application cannot operate on printers with spoolers. Use the Chooser to select another AppleTalk LaserWriter.
The System file on the startup disk is not current enough for this application to run. Try using a more recent startup disk.
Important system resources cannot be located. Try using a different startup disk.
The printer driver for the selected printer cannot be located. Make sure the file named "^2" is in the System Folder of the startup disk.
The connection was interrupted while communicating with the AppleTalk LaserWriter "^1". Check all AppleTalk connectors and try again.
The AppleTalk LaserWriter "^1" could not be found on the network. Check that both the Macintosh and the LaserWriter are properly connected to AppleTalk.
